2.5L Cat Fountain with Water-Level Window

Capacity: the listed reservoir is 2.5L. Check dimensions and suitability for your setup instead of relying on a universal pet-fit claim.

Use the front window to check the reservoir level. Confirm material, lighting-control and component-care specifications for the selected variant; no food-contact or BPA-free qualification is verified here.

Specification:

Mobile APP real-time monitoring of daily water consumption:
Supplier instructions describe app-based water-use reporting. Confirm compatibility and measurement specifications for the selected variant.
Transparent window with built-in LED light:
Easy to observe the water level and attract cats to drink at night
Nylon braided wire:
Keep the cable out of reach of pets.
Operating indicator light:
Power indicator: Steady on in the case of external power supply
In the case of battery power, the standby is off and the work is steady on.
Press the distribution network button for 5 seconds, then the distribution network light flashes and enters the distribution network state. After the distribution network, press for 5 seconds to release the distribution network state
Mode switch: Tap to switch standard mode/Smart mode.
The standard mode indicator is off, and the smart mode indicator is on.
When the battery is powered on, the smart mode is enabled by default and the indicator is off. You cannot switch to the standard mode.
Reset/reminder: When the reminder light shines, press the button to reset it
The indicator blinks quickly, reminding to replace the filter element
Indicator light flashing slowly - reminding clean water dispenser
The light is on - water shortage, water needs to be added

Packing list:
Stainless Steel Disc x1
Filter element support x1
Filter element x15V Hall Water Pump X1
Battery case x1
Base x1
Bucket x1
Instruction x1
5V-1A Adapter x1
Water pump filter cotton x1
Cleaning Brush x1

Note:
When using battery power, in order to save energy, the machine will not connect to wifi, and the app will prompt the offline state

Important Reminders:
1. For indoor use only!

2. For the health of your pet, it is suggested to change the water and clean the fountain every week.

3. Sometimes loud fountains are the consequence of a low water level or a dirty impeller. Clean your fountain’s impeller and ensure the water reaches to at least the minimum level in the water bowl.

4. Prepare and rinse the filter according to the instructions for the selected model before use.

5. According to your pet's drinking frequency and the number of pets using the fountain, replace the filter and the sponge every 2 to 3 weeks.

6. Please place the pump inside the square indention and make sure the double probe face towards the clear window in the water bowl.

7. Please keep the cable hidden to prevent pets from chewing it.

Transparent window with built-in LED light:
Easy to observe the water level and attract cats to drink at night